METALLISED
FILM PRIMER CL00221VWP (10740VWP)
TECHNICAL INFORMATION
CL00221VWP is a press ready waterbased primer suitable for roto printing
onto metallised films for subsequent printing with conventional printing
inks. It is particularly suited for applications where heat resistance
is required.
PROPERTIES:
CL00221VWP is suitable for priming metallised films such as the Mobil
Metallyte range of films. The primer is particularly suitable for applications
where heat resistance is required. We do also recommend printing a heat
resistant overlacquer to protect the printed and unprinted areas. Supply
viscosity: 16-17 Seconds Zahn 2 Cup @ 25 Deg C Non Volatile content: 10-10.5
% pH: 9.0 - 9.5
APPLICATION:
The varnish should be applied at a dry filmweight of 0.4 - 0.7 gsm by
the gravure process. Typically this could be achieved with an electoromechanically
engraved cylinder of 90 lines/cm, 30µm cell depth.
VISCOSITY:
CL00221VWP is supplied press ready and should not normally require adjustment.
However, if necessary, small amounts of water or water and alcohol (eg
isopropanol or ethanol) may be added to adjust viscosity and the coating
filmweight. can be added.
WASH UP:
Water or blends of water and alcohol (eg Ethanol or Isopropanol).
Note:
This information has been carefully compiled from experience gained in
field conditions and detailed laboratory testing. However, the product's
performance and it's suitability for the customer's purchase depend on
the particular conditions of use and the material being printed. We recommend
that customers satisfy themselves that each product meets their requirements
in all respects before commencing a print run. Since we cannot anticipate
or control the conditions under which our products are used, it is not
possible to guarantee their performance. We would point out that the information
provided here is only a recommendation, and may need to be altered to
suit the conditions and efficiency of the equipment employed. Coates Lorilleux
ink products are not designed for use in conjunction with those of any
other ink-maker or similar supplier unless agreed to in writing.
|